DIY INSTALLATION
DIY Truck Deck Installation Made Easy
Installing your TruckBoss Deck doesn’t require a shop visit or special tools. We designed every component to be easy to handle, with simple steps and clear video support. Whether you’re a seasoned gearhead or a first-time installer, this DIY truck deck installation guide will walk you through the process from start to finish.
What You’ll Need Before You Start
Before getting started, make sure you have these basic tools on hand:
Cordless drill with 1/2″ & 9/16″ deep set sockets
Tape measure
Allen wrench set
1/2″ & 9/16″ Open end wrenches
Level (optional, but helpful)
A second set of hands for placing the deck
Step-by-Step Video Guide
Watch our full installation walk through to see just how simple it is to install your TruckBoss Deck. We’ve broken it down into easy-to-follow chapters so you can pause and pick up right where you left off. Installation Video
Tips for a Smooth DIY Truck Deck Installation
Here are some pro tips from our team to make the install process even easier:
-
Unbox and organize: Lay out all hardware before starting.
-
Read ahead: Skim all instructions before installing.
-
Use anti-seize: Helps with long-term bolt removal if needed.
-
Double-check alignment: Especially on brackets and rail mounts.
-
Go slow with power tools: Avoid over-tightening aluminum components.
Need Help? We’ve Got You Covered
Still have questions? Our support team is here to help. Whether you need clarification or want a second opinion before tightening the last bolt, reach out anytime. You can also check our FAQ page or call us directly.
📞 1-866-440-6800
✉️ support@truckbossdecks.com
Explore Accessories to Complete Your Build
Now that your TruckBoss Deck is installed, take your setup to the next level. Add secure storage, loading ramps, or custom tie-downs to match how you ride or work.
